193X378ACG01    GE  Module cards in stock

193X378ACG01 GE Module cards in stock

Brand: GE                 Model number:193X378ACG01 

Colour:new                  Warranty: 193X369ABG01

Lead Time:3-day working day   Country of origin: USA

Price: Please contact us         Product weight:0.12kg

hipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account 

193X378ACG01    GE  Module cards in stock

193X378ACG01    GE  Module cards in stock

If current mode (4-20mA) is used for an input without an external

resistor, connect a jumper from the terminal marked JMP to the terminal

marked RTN for that circuit.

If an input current device operates outside the 4-20mA range, connect a

resistor across the voltage inputs. For example, to measure 10mA to

50mA current loop signals, install a 100 ohm resistor.

If current mode is used for an output circuit, use the terminals marked I+

and I-. For outputs set up in current mode, the block’s internal power

supply can be used to drive loads up to 300 Ohms per output. For loads

up to 2K Ohms, use an external power supply. Connect the positive

lead of the external supply to one side of the load, and the negative lead

of the external supply to block common on terminal 29. If the external

supply is between 24V and 50V, you can use terminal 25 or 30 as a tie

point for the positive connection. This point will be disconnected from the

external supply by a reverse biased diode.

Removing an Electronics Assembly _______________

The block’s Electronics Assembly can be replaced with a compatible

model without removing field wiring or reconfiguring the block.

 

Terminal

Assembly

Retaining

Screws

(Qty. 2)

Electronics

Assembly

Connector

Pins

1. Unscrew the retaining screws at the top and bottom of the block.

2. Using a Block Puller (IC660BLM507), engage the tabs in the first

vent slots. Move the tool to the center of the block and squeeze the

handle.

3. Pull the Electronics Assembly upward.

Warning

If power is applied to the field terminals, power is also exposed on the

connector pins at the base of the Terminal Assembly, and electrical

shock hazard exists. Do not touch the connector pins! Death or injury

may result.

Inserting an Electronics Assembly

1. Align the Electronics Assembly in the guides and push down firmly.

Caution

Do not exert excessive force; it may damage the block.

2. If unusual resistance is met, remove the Electronics Assembly. If

power is applied to the block, DO NOT TOUCH THE CONNECTOR

PINS! Inspect the Terminal Assembly, connector receptacle, and

connector edge board (on the Electronics Assembly). Be sure the

keying matches. Remove any obstacles and reinsert the

Electronics Assembly. Pay close attention to the alignment of the

guide pins.

3. Secure the Electronics Assembly with the screws on the top and

bottom of the Terminal Assembly


image.png

GE    DS3800DMEC1B1B    

GE    DS3800DMEC1C1C    

GE    DS3800DMEC1D1D    

GE    DS3800DMPC    

GE    DS3800DMPC1E1C    

GE    DS3800DMPC1F1E    

GE    DS3800DMPK1B1B    

GE    DS3800DMPK1E1D    

GE    DS3800DOAA    

GE    DS3800DPLA1B1A    

GE    DS3800DPSS1B1B    

GE    DS3800DPSS1C1C    

GE    DS3800DPZA1D1D    

GE    DS3800DSHA1A1A    

GE    DS3800DSHA1A1B    

GE    DS3800DSQD1A1A    

GE    DS3800DSWA    

GE    DS3800DXRA    

GE    DS3800DXRA1C1C    

GE    DS3800DXRC    

GE    DS3800DXRC1    

GE    DS3800HACA    

GE    DS3800HACA1A1A    

GE    DS3800HACB    

GE    DS3800HADA    

GE    DS3800HADA1A1A    

GE    DS3800HADA1B1B    

GE    DS3800HAFA1B1D    

GE    DS3800HAFA-1D1E    

GE    DS3800HAIA1D1B    

GE    DS3800HAIA1E1D    

GE    DS3800HAIA1EID    

GE    DS3800HAIC1A1A    

GE    DS3800HAIC1A1A 6BA00C    

GE    DS3800HAIC1A1A6BA00C    

GE    DS3800HAIC1E1C    

GE    DS3800HARA1B1C    

GE    DS3800HCIB    

GE    DS3800HCIB1B    

GE    DS3800HCIB1B1C    

GE    DS3800HCID    

GE    DS3800HCM1A1B    

GE    DS3800HCMA1E1G    

GE    DS3800HCMB    

GE    DS3800HCMB1C1C    

GE    DS3800HCMC    

GE    DS3800HCMC1A1B    

GE    DS3800HCMC-1A1B    

GE    DS3800HCVA1H1G    

GE    DS3800HCVA1J1G    

GE    DS3800HDDD    

GE    DS3800HDID1A1A    

GE    DS3800HDRA    

GE    DS3800HDRA1B    

GE    DS3800HDRA1B1B    

GE    DS3800HDRC1A1A    

GE    DS3800HFPB1F1E    

GE    DS3800HFPC    

GE    DS3800HFPC1L1H    

GE    DS3800HFPE1D1C    

GE    DS3800HFPG1C1B    

GE    DS3800HFPG1D1B    

GE    DS3800HFPG1D1C    

GE    DS3800HFPG1D1D    

GE    DS3800HFPG1E1E    

GE    DS3800HFXA1F1D    

GE    DS3800HFXB    

GE    DS3800HFXB1G1C    

GE    DS3800HFXB1R1H    

GE    DS3800HFXC    

GE    DS3800HFXD    




You are welcome to make an inquiry


E-mail:


free@fenoux.com


Tel.:


+86 133 7698 4225


Skype:


+86 133 7698 4225


WhatsApp:


+86 133 7698 4225



    









Copyright © Hong Kong Saul Electric Co., Ltd. All Rights Reserved Sitemap

Follow Us
Disclaimers: All trademarks on the website are not owned by us. If there is any infrigement, wecan replace them at any time.